• ¡Welcome to the WhatPulse Forums!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: Whatpulse 3.2 on Ubuntu 21.04
Threaded Mode
#1
Hi there,

I installed the latest revision of Ubuntu on a spare laptop yesterday, and I'm getting the following terminal output when starting the application. It installed without issue, but when starting the window prompting me to log in through a browser appears for a second or so before closing.

Here is the output from the terminal. From my absolutely untrained eyes, it almost appears to be an issue with Ubuntu 21.04 using wayland?

redacted@redacted-ThinkPad-T470:~$ whatpulse
Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.
QSocketNotifier: Can only be used with threads started with QThread
Using Wayland-EGL
24-04-2021 13:29:24.116 INFO "Starting WhatPulse 3.2..."
QObject:ConfusedtartTimer: Timers cannot have negative intervals
24-04-2021 13:29:24.132 DEBUG Creating db connection with name: "wp-db-connection"
24-04-2021 13:29:24.132 DEBUG Database file: "/home/redacted/snap/whatpulse/7/.local/share/whatpulse.db"
24-04-2021 13:29:24.133 DEBUG Database check: "ok"
24-04-2021 13:29:24.134 DEBUG Opened database in: 2 ms
24-04-2021 13:29:24.134 DEBUG Database size: 0 MB
24-04-2021 13:29:24.152 DEBUG Encrypted file: "/home/redacted/snap/whatpulse/7/.local/share/whatpulse.wpw"
24-04-2021 13:29:24.152 DEBUG Unable to open savefile
24-04-2021 13:29:24.152 WARN Failed to load ' "/home/redacted/snap/whatpulse/7/.local/share/whatpulse.wpw" ' - trying backup file
24-04-2021 13:29:24.152 DEBUG Unable to open savefile
24-04-2021 13:29:24.159 DEBUG Loaded application aliases
24-04-2021 13:29:24.159 WARN PF_PACKET is not available.
Fallback to ProcNetworkTrafficMonitor. Only interface statistics available.
24-04-2021 13:29:24.182 WARN Cannot open lspci-command
QObject::connect: No such signal QPlatformNativeInterface:ConfusedystemTrayWindowChanged(QScreen*)
24-04-2021 13:29:24.319 DEBUG WhatPulse 3.2 has started
24-04-2021 13:29:24.321 DEBUG found /var/lib/snapd/hostfs/etc/os-release
24-04-2021 13:29:24.323 WARN Unable to detect videocard from lspci
libpng warning: iCCP: known incorrect sRGB profile
Using the 'xdg-shell' shell integration
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
24-04-2021 13:29:24.584 DEBUG Starting timers and collector..
24-04-2021 13:29:24.592 DEBUG Creating device listener for "/dev/input/event0"
24-04-2021 13:29:24.592 DEBUG Creating device listener for "/dev/input/event1"
24-04-2021 13:29:24.592 DEBUG Creating device listener for "/dev/input/event11"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event12"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event13"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event14"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event15"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event16"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event17"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event18"
24-04-2021 13:29:24.593 DEBUG Creating device listener for "/dev/input/event19"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event2"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event20"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event21"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event22"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event3"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event4"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event5"
24-04-2021 13:29:24.594 DEBUG Creating device listener for "/dev/input/event6"
24-04-2021 13:29:24.595 DEBUG Creating device listener for "/dev/input/event8"
24-04-2021 13:29:24.598 DEBUG Network ports description file ( "/home/redacted/snap/whatpulse/7/.local/share/network-ports.csv" ) does not exist! The client will not be able to translate port numbers to human readable form.
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 20 (X_GetProperty)
Resource id in failed request: 0x0
Serial number of failed request: 13
Current serial number in output stream: 13
redacted@redacted-ThinkPad-T470:~$

Any advice is greatly appreciated. Thanks!
 
Reply
#2
I haven't tested WhatPulse 3.2 (mine is 3.1, I believe), but I encountered almost exactly the same issue when I updated my Ubuntu to 21.04 beta with WhatPulse 3.1. I installed my client before the update, so I didn't see the login prompt, since it was already logged in. But the client always closed itself, right after it became an active window. Even if I don't touch the client at all, it sort of lives on the task bar without dying, but it didn't seem to record anything.

However, according to this page, that is a known limitation.
Quote: https://help.whatpulse.org/articles/linux-installation
Known limitations:
Not supported in Wayland (yet).

After I set my Ubuntu to use Xorg, it works fine. But I haven't found a solution with wayland. You can switch back to Xorg on the login screen (the option is next to the login button).
 
Reply
#3
(04-25-2021, 07:39 AM)buggy Wrote: I haven't tested WhatPulse 3.2 (mine is 3.1, I believe), but I encountered almost exactly the same issue when I updated my Ubuntu to 21.04 beta with WhatPulse 3.1. I installed my client before the update, so I didn't see the login prompt, since it was already logged in. But the client always closed itself, right after it became an active window. Even if I don't touch the client at all, it sort of lives on the task bar without dying, but it didn't seem to record anything.

However, according to this page, that is a known limitation.
Quote: https://help.whatpulse.org/articles/linux-installation
Known limitations:
Not supported in Wayland (yet).

After I set my Ubuntu to use Xorg, it works fine. But I haven't found a solution with wayland. You can switch back to Xorg on the login screen (the option is next to the login button).

Ahhh, thank you for the information. I suffered from a severe lack of RTFM right there, my apologies.
 
Reply
#4
Are there any plans to implement XWayland support at the very least as a compatibility layer? WhatPulse is the remaining thing holding me back from switching to Wayland, and the XWayland compat layer would certainly get it working
 
Reply
  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Whatpulse is not tracking anything on linux Xabec 2 176 11-29-2021, 09:08 AM
Last Post: Xabec
  Whatpulse client backup: Access is denied. Galaxied 1 97 11-28-2021, 10:31 AM
Last Post: smitmartijn
  WhatPulse on Ubuntu not recording network metrics [solved] Code-E 2 264 11-03-2021, 10:29 PM
Last Post: Code-E
  Ubuntu issues with network stats XploD 1 326 10-20-2021, 08:21 AM
Last Post: XploD
  WhatPulse randomly stop tracking keyboard strokes anandinasu 0 271 09-29-2021, 03:37 AM
Last Post: anandinasu
  [SOLVED] WhatPulse Refuses to Start automatically. iisacc 11 13,107 08-23-2021, 09:45 PM
Last Post: Tealdragon204
  Whatpulse doesn't track internet up/down correctly on gigibit internet Deuss 2 554 08-19-2021, 08:32 PM
Last Post: lvh1
  Whatpulse client stops tracking keys Sylverblack 0 396 08-04-2021, 04:31 PM
Last Post: Sylverblack
  WhatPulse error on Linux (Elementary-OS 6) Suxhe 0 579 06-13-2021, 10:56 PM
Last Post: Suxhe
  whatpulse is writing to database every second minho 1 815 06-11-2021, 07:00 PM
Last Post: Alexey..Zubenko

Forum Jump:


Browsing: 1 Guest(s)